IPA MILL SPECIFICATIONS

Download Technical Chart

Mill Size Rotor Diameter Motor Size Range Throughput Factor Capacity Range (0.02″ – 0.05″ RH Screen) Capacity Range (0.079″ – 0.25″ RH Screen) Mill Overall Dimensions (LxWxH) Average Construction Time Competitive Model #
inch cm HP KW Ratio lbs/hr kgs/hr lbs/hr kgs/hr inch cm
 Weeks
LSM 5.4 13.7 0.5 0.375 0.07 4 – 15 2 – 7 28 – 105 13 – 48 19x13x22 48x33x56 8 L1A
PM6X15 10.50 26.70 5 3.75 1 75 – 400 35 – 180 400 – 1500 180 – 680 59x39x63 150x100x160 12 D6A
M6X15 10.50 26.67 7.5 – 15 5.5 – 11.25 1.0 75 – 400 35 – 180 400 – 1500 180 – 680 39x30x64 100x75x160 8 DASO6
M12x15 10.50 26.67 7.5 – 15 5.5 – 11.25 2.4 180 – 960 80 – 435 960 – 3600 435 – 1635 42x36x73 105x90x185 8 DKASO12
M8x22 14.38 36.51 30 – 40 22.5 – 30 1.8 135 – 720 60 – 325 720 – 2700 325 – 1225 61x36x63 155x90x160 12 FASO8
M12x22 14.38 36.51 40 – 75 30 – 56.25 2.8 210 – 1120 95 – 510 1120 – 4200 510 – 1910 61x40x63 155x100x160 12 FASO12
M20x22 14.38 36.51 40 – 75 30 – 56.25 4.9 370 – 1960 170 – 890 1960 – 7350 890 – 3340 63x49x85 160x125x215 12 FASO20
M30x28 17.25 43.82 75 – 150 56.25 – 112.5 9.0 675 – 3600 305 – 1635 3600 – 13500 1635 – 6135 77x69x70 195x175x178 14 HASO30

Note: Capacity ranges are based on typical materials. There will always be materials that fall out of this range. Dairy products have higher rates – consult manufacturer.

Note: Overall height dimensions include a 36 inch clearance from mill discharge to floor. Except the M6x11 Pharma and M30x28 mill which are 24 inches.